| DA-IRIGB-4DIO-PCI104-EMC4 Hardware Specifications |
| • Hardware |
| Communication Controller |
FPGA Cyclone V |
| Form Factor |
PC-104 |
| • Time Code Input |
| IRIG-B |
Based on the IRIG STANDARD 200-04 and IEEE 1344 |
| • Precision and Accuracy |
| Accuracy (Time Synchronization) |
±1 µs |
| Accuracy (Free Running) |
±500 ms @ 24 hr |
| • Input Signals |
| Single Level |
• Open: High
• Short to GND:> Low
• Level Input: 5 to 12 V |
| Differential Level |
• D+ - D- > 0.2 V, RXD is High
• D+ - D- < -0.2 V, RXD is Low
• Level Input: 5 V |
| • Interface |
| IRIG-B |
2-pin wafer to DB9 |
| DI/DO |
10-pin wafter to DB9 |
| • Protection |
| ESD Protection |
8 kV contact, 15 kV Air ESD protection |
| Surge Protection |
2 kV line-to-line and 4 kV line-to-ground surge protection, 8/20 µs waveform |
| Insulation |
500 V |
| • Digital Input |
| Input Channels |
3, source type |
| Input Voltage |
0 to 30 VDC |
| Digital Input Levels for Dry Contacts |
• Logic level 0: Close to GND• Logic level 1: Open |
| Digital Input Levels for Wet Contacts |
• Logic level 0: +3 V max.• Logic level 1: +10 V to +30 V (source to DI) |
| Isolation |
3 kV optical isolation |
| Connector Type |
DB9 male |
| • Digital Output |
| Output Channels |
4, sink type |
| Output Current |
Max. 200 mA per channel |
| On-state Voltage |
24 VDC nominal, open collector to 30 V |
| Isolation |
3 kV optical isolation |
| Connector Type |
Male |
| • Operating Systems |
| Windows |
Windows 7E |
| Linux |
Debian 7 |
| • Physical Characteristics |
| Dimensions |
90 x 96 mm (3.54 x 3.78 in) |
| • Environmental Limits |
| Operating Temperature |
-10 to 60°C (14 to 140°F) |
| Storage Temperature |
-40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity |
5 to 95% (non-condensing) |
| Altitude |
Up to 2000 m |
| • Standards and Certifications |
| EMC |
CE, FCC |
| EMI |
EN 55022, EN 61000-3-2, EN 61000-3-3, FCC Part 15 Subpart B Class A |
| EMS |
EN 55024, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11 |
| Green Product |
RoHS, CRoHS, WEEE |
| |
| DA-SP08-DB, DA-SP08-I-DB, DA-SP08-I-TB Hardware Specifications |
| • Serial Interface |
| Serial Standards |
8 RS-232/422/485 ports, software selectable (DB9 male or terminal block connector) |
| ESD Protection |
15 kV for all signals |
| Isolation |
2 kV digital isolation (DA-SP08-I-DB and DA-SP08-I-TB only) |
| • Serial Communication Parameters |
| Data Bits |
5, 6, 7, 8 |
| Stop Bits |
1, 1.5, 2 |
| Parity |
None, Even, Odd, Space, Mark |
| Flow Control |
RTS/CTS, XON/XOFF, ADDC® (automatic data direction control) for RS-485 |
| Baudrate |
50 bps to 921.6 kbps (supports non-standard baudrates; see user’s manual for details) |
| • Serial Signals |
| RS-232 |
TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND |
| RS-422 |
TxD+, TxD-, RxD+, RxD-, GND |
| RS-485-4w |
TxD+, TxD-, RxD+, RxD-, GND |
| RS-485-2w |
Data+, Data-, GND |
| • Physical Characteristics |
| Weight |
290 g |
| Dimensions |
130 x 150 x 42 mm (5.12 x 5.91 x 1.65 in) |
| MTBF (mean time between failures) |
1,753,143 hrs |
| |
| DA-SP38-I-TB Hardware Specifications |
| • Serial Interface |
| Serial Standards |
8 RS-422/485 ports, software selectable (DB9 male or terminal block connector) |
| ESD Protection |
15 kV for all signals |
| Isolation |
2 kV digital isolation |
| • Serial Communication Parameters |
| Data Bits |
5, 6, 7, 8 |
| Stop Bits |
1, 1.5, 2 |
| Parity |
None, Even, Odd, Space, Mark |
| Flow Control |
RTS/CTS, XON/XOFF, ADDC® (automatic data direction control) for RS-485 |
| Baudrate |
50 bps to 921.6 kbps (supports non-standard baudrates; see user’s manual for details) |
| • Serial Signals |
| RS-422 |
TxD+, TxD-, RxD+, RxD-, GND |
| RS-485-4w |
TxD+, TxD-, RxD+, RxD-, GND |
| RS-485-2w |
Data+, Data-, GND |
| • Physical Characteristics |
| Weight |
245 g |
| Dimensions |
130 x 150 x 42 mm (5.12 x 5.91 x 1.65 in) |
| |
| DA-LN04-RJ Hardware Specifications |
| • Ethernet Interface |
| LAN |
4 auto-sensing 10/100 Mbps ports (RJ45) |
| Magnetic Isolation Protection |
1.5 kV built-in |
| • Physical Characteristics |
| Weight |
198 g |
| Dimensions |
132 x 150 x 42 mm (5.20 x 5.91 x 1.65 in) |
| |
| DA-SW08-RJ Hardware Specifications |
| • Ethernet Interface |
| LAN |
8 auto-sensing 10/100 Mbps unmanaged Ethernet switch ports (RJ45) |
| Magnetic Isolation Protection |
1.5 kV built-in |
| • Physical Characteristics |
| Weight |
200 g |
| Dimensions |
132 x 150 x 42 mm (5.20 x 5.91 x 1.65 in) |
| |
| DA-UPCI-DK Hardware Specifications |
| • Universal PCI Expansion Adatpor |
| PCI Slots |
1 |
| Interface Bus |
32-bit Universal PCI (3.3 V and 5 V) |
| • Physical Characteristics |
| Weight |
195 g |
| Dimensions |
132 x 150 x 42 mm (5.20 x 5.91 x 1.65 in) |
| MTBF (mean time between failures) |
11,053,266 hrs |
| |
| DA-FX04-MM-ST-T Hardware Specifications |
| • Fiber Interface |
| Number of Ports |
4 (100BaseFX) |
| Fiber Mode |
Multi-mode |
| Connector Type |
ST |
| Optical Wavelength |
0 to 2 km, 1310 nm (62.5/125 μm, 500 MHz*km) |
| Min-TX Output |
-20 dBm |
| Max-TX Output |
-14 dBm |
| RX Sensitivity |
-34 dBm |
| • Physical Characteristics |
| Weight |
495 g |
| Dimensions |
132 x 150 x 42 mm (5.20 x 5.91 x 1.65 in) |
| • Environmental Limits |
| Operating Temperature |
-40 to 70°C (-40 to 158°F) |
| • Standards and Certifications |
| EMC |
EMC Level 4, ESD Level 4, criteria A |
| • Software Functions |
| IEEE 1588 or IP Teaming Selectable (Default =IP Teaming) |
Supports 4 modes |
| AFT |
Adaptor Failover Teaming |
| SFT |
Switch Fault Tolerance |
| ALB |
Adaptor Failover and Load Balancing |
| Link Aggregation |
supported |
