|
|
MI 1005 E Medical Built In Isolator
Ethernet Isolation, Mountable design • Transmission speed: 10/100/1000 MBit/s
• Dielectric strength: 5 kV AC • Dielectric strength under high-stress
conditions: 10 kV AC (10 sec) • Ports: 2 x RJ45 • full IEEE 802.3 compatibility
• Meets HARTING Fastjack receptables and accessories • Standards: EN 60601-1, EN
60601-1-2, UL Listed E342310, CE, RoHS, REACH
|
|
|
Built-in isolator for galvanic network isolation of electrical medical
devices
- Ideal for medical device makers
- Isolation starting at the wall of the device housing
- Easy installation thanks to standardized Harting PushPull technology
- Allows for planning reliability and long-term availability
- Small and lightweight at just 20 g (approx.)
- No fixed cables, easy to replace
- Harting PushPull technology, up to IP68
- Inexpensive, efficient operation, no dedicated power supply required
In addition to network isolators with fixed cables, the MI 1005 E offers a
simple and cost-effective way to isolate medical devices, starting at the wall
of the housing. This makes the insulator particularly well-suited for medical
device makers. Using standard Harting PushPull technology, the MI 1005 E Medical
Built In insulator can be installed quickly and easily into existing devices.
Long-term availability also offers planning certainty necessary for new product
development.
Isolation Voltage: |
5.000 V |
Data Speed: |
10/100/1000 MBit/s |
Conformity Ethernet: |
IEEE 802.3 |
Standards approved by: |
IEC 60601-1 (3rd Edition); IEC 60601-1-2 UL 60601 (UL Listed
E342310) |
Connections:: |
2 x RJ45 input / output |
Material: |
UL94V-0 / RoHS-compliant |
Time between failures: |
0.21 x 10 ^ 8 (1 error in 21 million hours) |
|
Frequently Bought Together |
|
|
|
|